LT- Master Industry

Agrotec

LT- Master Industry

LT-MASTER INDUSTRY | INDUSTRIAL BALER-WRAPPER COMBINATION

The LT-Master offers a quick and easy solution to the problem of having to store and transport various types of materials. The materials are chopped prior to baling. This procedure makes the round bales ideally suited for intermediate storage and allows for the space-saving transport of the bales. When pressed into a bale, the materials stay clean and dry.

Depending on the size and the structure of the material, compaction rates of between 30 % and 70 % can be achieved.

High compaction

The high compression strength compacts the material to a minimal volume. This helps save valuable storage space.

Fast and agile

The pivoting drawbar can swivel up to 30° to either side. This provides for a tight turning radius and also allows the machine to be powered from either side.

Sophisticated brake system

Customers can choose between a standard dual-line air brake system and a hydraulicbrake system.

Machine set-up

A tremendous plus! The machine is ready for operation within three minutes.

Well lubricated

The central lubricator continuously supplies the most important lubrication points with grease and oil. This keeps wear and tear to a minimum, guaranteeing an exceptionally long lifetime.

Always plenty in stock

Thanks to its hydraulically folding film storage that holds up to 18 rolls of film, the LT-Master is ideally suited for even the longest workdays.

Ultimate control

The program control "PROFI" uses a bus system to control the entire work flow in fully automatic fashion - all that remains for the driver to do is monitor the machine.

No distance too far

The 80 km/h (50 mph) chassis allows you to quickly reach any jobsite - whether you travel by truck or tractor.

Perfectly lit

The LED lighting system keeps the LT-Master perfectly lit even if you have to work at night.

RDF / substitute fuels

A problem of increasing urgency is the storage of garbage and waste. Some materials are recycled for further processing and used as substitute fuels.

Plastic materials

Films and solid remnants of plastic with a grain size of up to 50 mm

Wood / wood chips

Wood shavings, wood chips, chopped brushwood, wood wool, bark mulch and sawdust

Other materials

Grain, sugar beet chips, bagasse, miscanthus, horse manure, compost

Twin wrapping arm

Dual binding unit for net and film

On-board hydraulic system with oil cooler

Hydraulic belt pre-tensioning

Refeed to prevent possible crumbling losses

Hydraulically actuated wrapping table

4 bale conveyor belts including belt guide and 2 bale guide rollers

Bale drop towards the front via hydraulic bale delivery ramp

Height-adjustable drawbar

Film stretching unit 500 mm (20”) and 750 mm (30”) combined with overlap adjustment

Automatic film cutting and holding system

Film monitoring unit

Single-film mode

Tandem axle chassis

Hydraulically lowerable film storage for up to 18 rolls of film

Dual-line air brake system for 80 km/h combined with hydraulic brake

Additional radio remote control for bale deposit

Automatic central lubrication system for oil and grease

Integrated feeder

Working width 3.50 m (11’ 6”)

Variable bale size (only for film binding)

Infinitely variable bale size from 0.60 – 1.15 m (24” - 48”)

Camera system

The four cameras are positioned such that they afford you a clear view of the top of the bale chamber, the sloping conveyor, the wrapping table and the rear of the machine (on the right in direction of travel) at all times.

Water injection for bale chamber

Consists of solenoid valve, tubing, and adjustable nozzles. For mixing water into dry materials.

Fully automatic program control PROFI

The execution of all work cycles is fully automatic

Technical data (basic model)

	Transport position	Work position
Weight:	15,930 kg (35,120 lbs)
Length:	11,580 mm (38‘)	13,940 mm (45‘ 9“)
Width:	2,550 mm (8‘ 4“)	max. 5,200 mm (17‘ 1“)
Height:	4,000 mm (13‘ 2“)	max. 4010 mm (13‘ 2“)
Bale diameter:	von 0.60 bis 1.15 m (from 24” - 48”)

Required connections

1 double-acting and 1 single-acting control device for the pivoting drawbar
7-pin power outlet for the entire lighting system, excluding work lights
The included wiring harness is used to supply electricity to the machine
Connection for electric motor: 400V/50 Hz, CEE 125A 740 rpm, protection class IP55

Agrotec Machine - Göweil Baling and Wrapping Technology